[請益] Pro/MECHANICA 電腦分析記憶體配置問題
各位板大大家好:
近來時小弟遇到一個問題想跟大家請教
PRO/M解算器(solver)的記憶体分配問題，如何分配....
在跑PRO/M時有一個問題....問題如下..
Run Settings
Memory allocation for block solver: 128.0
Memory allocation for element matrices: 2.0
部份省略...
The design study terminated abnormally.
An error has occurred while requesting an additional
266.832 megabytes of memory from the operating system.
To correct this problem, you may need to increase the amount
of swap space on your system. You may also need to increase
the memory usage limits that are set for your system.
For large problems you can also try decreasing the
solram allocation setting.
At least 1.92205 gigabytes of memory are needed to run this design study.
Documentation for this issue can be found in the Technical
Support Knowledge base at:
http://www.ptc.com/cs/tpi/128412.htm
For more information, you can search for the term "swap space"
in the Help Center. To access the Help Center Pro/MECHANICA
topics, select #Help>#Help Center, set the functional area to
"Simulation" and then click on the "Structure and Thermal
Online Help" link.
想請問教這是否是記憶体分配不夠，如果是又如何把解算器的記憶体加大....
感謝各位大大....
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 163.23.218.133
※ SWELLISH:轉錄至看板 Cad_Cae 11/12 23:16
※ 編輯: SWELLISH 來自: 163.23.218.133 (11/12 23:50)
Mechanical 近期熱門文章
PTT職涯區 即時熱門文章
